代碼 UFB-416: EncOut Cflct

Type: Alarm 1 Either P9 [FB0 Loss Cfg] or P39 [FB1 Loss Cfg] Indicates that there is one of the following problems with the Encoder Output: • The selection in the P80 [Enc Out Sel] is not possible since the required pins on the terminal blocks are already used for Feedback 0 or 1 according to P6 [FB0 Device Sel] and P36 [FB1 Device Sel]. • P80 [Enc Out Sel] is set to 2 “Sine Cosine” and there is no signal connected to the pins 1…4 of TB 1. • P80 [Enc Out Sel] is set to 2 “Sine Cosine,” the value of P15/45 [FBX IncAndSC PPR] is not a power of two, and P84 [EncOut Z PPR] is not set to 0 “1 ZPulse.” The value of P15/45 [FBX IncAndSC PPR] must be a power of two. • P80 [Enc Out Sel] is set to 3 “Channel X” or 4 “Channel Y” and there is no encoder connected to that channel. • P80 [Enc Out Sel] is set to 3 “Channel X” or 4 “Channel Y” and there is a linear encoder connected to this channel. Reset Description