コード 700004: EMERGENCY STOP button
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な EMERGENCY STOP button アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
It was attempted to switch on the control, but an [EMERGENCYSTOP]button on the machine is pressed (locked). The PLC input signal "EMERGENCY STOP buttons OK" is not registered. The control is switched off and cannot be switched on. 2. Unlock the [EMERGENCY-STOP] button on all operating elements. Switch on the control on the operating panel with the [Control ON] key. 3. Press [RESET] key. Message is cleared. All [EMERGENCY-STOP] buttons must be unlocked before the control can be switched on.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 700004 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700004.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026