代码 700013: Spindle rpm higher than 800
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Spindle rpm higher than 800 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
An attempt has been made in set up mode to move at too high a speed. No enable is given for the main spindle. Feed STOP and Spindle STOP 1. In order to move in set up mode with a speed, the programmed speed must be < 800 rpm. 2. Press [RESET] key. Message is cleared. 3. Program permissible speed. There is no tool in the spindle but a speed in excess of 800 rpm has been programmed. (Appears with T0 or in connection with the Service function M105). No enable is given for the main spindle. Feed STOP and Spindle STOP Change the tool in the spindle. If there is "no tool in the spindle", the max. permissible spindle speed must be restricted to 800 rpm. (With spindle correction switch 100%). Cause 2: Error messages Setting mode Spindle rpm higher than 800
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 700013 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700013.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026