コード 700031: Tool live management error (Siemens)
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Tool live management error (Siemens) アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
An internal tool management acknowledgement to the „NCK“ has been interrupted by an error and not realised correctly. Either „Reset“ or „Emergency Stop“ was actuated during the tool changing procedure (resaving of tool data). The „Changer up/down“ with „Tool change manual“ or „SE functions“ procedure was interrupted. (Reset, Emergency Stop etc.) The asynchronous resaving of tool data from the magazine to spindle (or vice versa) was thus not realised correctly. A spindle tool was defined, but the tool is not in the tool table. The tool change procedure is stopped. 1. Moving tool changer to home position 2. Press the [RESET] key or [Lamp test]. Message is cleared. A spindle tool should be defined which is in the tool table if the message 700060 „Spindle tool not defined“ is displayed.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 700031 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700031.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026