代码 700222: No tool found
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 No tool found 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
A tool has been called with "TOCH" or "SETO" which is not present in the tool table (ID – AF1) or (ID – AF2) as an Identification number. M00 / M01 are active. In the NC program TOCH or SETO, the error message "No tool found" is displayed after M00. Check the T - output of the "Identification number" to see if the output tool is also present in the tool table. Cause 1: The menu can be found under: The tool which has been called is "blocked" from attribute A or is declared to be "broken". M00 / M01 are active. In the NC program TOCH or SETO, the error message "No tool found" is displayed after M00. Check in tool attribute [ A ] to see if the tool is declared to be blocked (4) or broken (5). The menu can be found under:
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 700222 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700222.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026