代码 700247: Wrong tool in the spindle
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Wrong tool in the spindle 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Message can appear during a block search run. Cause 1: The machining program can not be started. 1. Press [RESET] key. Message is cleared. 2. Before the block search run, program the tool in the spindle again. Txx M6 On entering the machining program, possibly with "Block search", no coincidence was found between the spindle tool and the current T output. Feed Stop Read-in enable missing. Check the "entering position" in the NC program to see if the tool which belongs to this NC block is also the current spindle tool. Enter the correct NC block (T** M6). Or, change the tool necessary. Entry with block search run is only possible with the [Calc. contour] key, since otherwise there is no T output.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 700247 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700247.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026