代碼 700247: Wrong tool in the spindle
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Wrong tool in the spindle 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Message can appear during a block search run. Cause 1: The machining program can not be started. 1. Press [RESET] key. Message is cleared. 2. Before the block search run, program the tool in the spindle again. Txx M6 On entering the machining program, possibly with "Block search", no coincidence was found between the spindle tool and the current T output. Feed Stop Read-in enable missing. Check the "entering position" in the NC program to see if the tool which belongs to this NC block is also the current spindle tool. Enter the correct NC block (T** M6). Or, change the tool necessary. Entry with block search run is only possible with the [Calc. contour] key, since otherwise there is no T output.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 700247 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700247.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026