代码 700331: No tool clamping system selected
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 No tool clamping system selected 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
When the machine was switched on it was noticed that no “tool clamping system“ had been selected. In the "general machine parameter" 14510[37], no clamping system is entered (value 0). As the machines have different clamping systems, the respective clamping system must be selected at the time of commissioning. Tool change or clamp/unclamp tool not possible. The required clamping system must be entered in the “General machine parameter“ 14510[37 ]. (See also chapter: Tool clamping system activation) Error messages Tool change No tool clamping system selected If a wrong clamping system has been selected the selection can only be cancelled as follows: 1. Switch to "Manual input" mode. 2. Program M88. 3. Press [CYCLE START] key. 4. Program H157. 5. Press the [CYCLE START] and [RAPID] keys at the same time.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 700331 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700331.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026