Code 700412: Chip spiral not selected

In the machining program, the function M264 was output, which monitors whether the corresponding operating state has been activated. Feed Stop, if the corresponding operating state is not activated during a query. Cause 2: Error messages Cooling lubrication Chip spiral not selected 1. Select the required “operating condition“ by pressing the respective key. 2. Check whether the option is set for the corresponding function. 3. Check whether the function was activated in the corresponding menus. 4. Press [FEED START] or [RESET] key Message is cleared and the machining program can be continued. Alternatively, clear the message with the [Control OFF] key These messages will appear immediately after output of the Mfunction, even when the respective option has been deactivated (PLC – machine data).