代碼 700629: Brake, magazine cover, not actuated (WAR axis)
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Brake, magazine cover, not actuated (WAR axis) 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
"Release brake, magazine cover (WAR axis)" function was actuated, but within 0.5 seconds, no response came indicating that the brake was actuated. PLC input signal "Magazine cover brake actuated (WAR axis)" is not registered. Read disable Feed Stop "Release brake, magazine cover (WAR axis)" actuation is cancelled so that the motor is not constantly working against the clamping. 1. Check the PLC output signal "Release brake, magazine cover (WAR axis)" and the brake actuation. 2. Check the PLC input signal "Magazine cover brake actuated (WAR axis)". 3. Turn off the machine control with the key [Control OFF]. 4. Turn on the machine control with the key [Control ON]. 5. Press [RESET] key. Message is cleared. The error message "Drive not ready" can also appear as a consequential error.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 700629 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700629.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026