代碼 700731: Replace coolant of cooling unit
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Replace coolant of cooling unit 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Service for the cooling medium of the cooling unit is due. The cooling medium must be exchanged. After 12 months, this service is due at the first of the month. On the first two days, only a warning is displayed. Starting from the 3rd day, Feed Stop after every end of program ( M30 or change work area/table side) To keep working on a short-term basis, the operator can acknowledge "Feed Stop" with the key [FEED START] but "Feed Stop" reappears immediately once the program ends. The service must be carried out and confirmed by authorized personnel according to the "Filling Instructions". (See section.... Confirm maintenance of cooling unit) This is monitored according to: Chiron message M-Kobü No. 254
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 700731 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 700731.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026