代碼 701063: Tool was not stored in magazine correctly
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Tool was not stored in magazine correctly 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
A tool change is pending, but the check has shown that a tool is in the changing position which was previously stored into the magazine incorrectly. There is no corresponding bit "Tool place correctly occupied". 1 = Magazine place correctly occupied. 0 = Tool not present or not correctly inserted. As soon as there is a tool in the magazine, the corresponding bit "Magazine place correctly occupied" must be set in addition. The tool change is stopped and is not carried out further. 1. Tool change must be aborted. 2. Move to home position with the [TOOL CH HOME POS.] key. 3. In manual mode, move the corresponding magazine place to the loading position and check. 4. The tool must be removed and then stored in correctly.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701063 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701063.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026