コード 701100: Rotary table warm-up cycle required! Start cycle in <JOG> mode, <5th A> and with the <Feed Start> key

A speed greater than 200 rpm was programmed for the rotary table, but this requires a warm-up first. A rotary table warm-up is required starting from a speed greater than 200 rpm if it has been at a standstill for longer than 2 hours. Feed Stop on axes 5 (C) and 6 (CT2) 1. Press [RESET] key. Program will be aborted. 2. In manual mode + [5.A] axis activated, press the [FEED START] key. Warm-up starts. Alternatively clear message with [Control OFF] and [Control ON]. Warm-up cycle C_AX_WARMUP is called up in ASUP_2_M with the function [15]. To check whether a warm-up will be necessary in the near future, a query can be made at the beginning in the machining program with the cycle C_AX_WARMUP_CHECK. In this cycle, it is checked whether the rotary table has been at a standstill for longer than 1 hour and 40 minutes already. In this case, the warm-up is started automatically.