コード 701456: Warning minimum lubrication
問題の説明と安全警告
Chiron Siemens-Control CNC は重大な Warning minimum lubrication アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Minimal lubrication (MMS) was activated ( M501 to 516 ), but the MMS system signals an error (warning message). The corresponding cause of error is displayed on the "MMS system housing". 4 - Medium MIN (fill up) 6 - NC error (reserve) This message is just for informational purposes and has no effect on the machine function. 1. Eliminate the cause of error on the "MMS system". 2. Check PLC input signals MINIMUM LUBRICATION OUT DATA BCD 1,2,4,8 from MMS system. 3. As soon as the "MMS system" signals "OK" again, the message is automatically cleared. For further information with regard to this, please refer to the "LUBRIX" manufacturer's operating instructions.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Chiron Siemens-Control CNC のアラームについて
Chiron によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。Siemens-Control CNC が 701456 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 545 Chiron Siemens-Control CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701456.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026