Code 701535: Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start>
Problembeschreibung & Sicherheitswarnung
Die Chiron Siemens-Control CNC hat einen kritischen Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle Start> + <Feed Start>-Alarm ausgelöst. Sofortige Aufmerksamkeit durch einen qualifizierten Bediener oder Wartungstechniker ist erforderlich, um Folgeschäden an der Ausrüstung oder verdorbene Teile während des Fertigungszyklus zu vermeiden. Stellen Sie immer sicher, dass standardmäßige Sicherheits- und LOTO-Verfahren befolgt werden, bevor Sie auf Schaltschränke zugreifen.
Offizielle Schritte zur Fehlerbehebung
The cycle for the spindle warm-up was started. This is a safety query ( M152 ), to ask whether the current tool in the spindle is suitable for the maximum spindle speed of the warm-up cycle. Feed Stop and Spindle Stop Spindle warm-up menu appears on the screen. 1. Check whether the tool in the spindle is suitable for the specified spindle speed. 2. If the tool is not suitable, abort the operation in the menu with Abort and change in a suitable tool. 3. If the tool is suitable, confirm this in the menu with OK. NOTICE! Tool is turned at a high speed. Only enable such tools for the warm-up which are suitable for the maximum speed. 4. Press the [CYCLE START] and [FEED START] keys at the same time to start the warm-up cycle. Error messages Tool spindle Tool suitable for spindle speed in warm-up cycle? Yes, continue with <Cycle St...
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Über Chiron Siemens-Control CNC Alarme
Industriesteuerungen von Chiron verfügen über umfangreiche Diagnosesysteme zum Schutz der internen Schaltkreise und mechanischen Verbindungen. Wenn eine Siemens-Control CNC einen Fehlercode wie 701535 ausgibt, deutet dies typischerweise auf eine Diskrepanz zwischen befohlenen Werten und tatsächlichem Sensor-Feedback hin.
Vollständige Alarmliste: 545 Chiron Siemens-Control CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701535.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026