代碼 701606: No tool in the tool gripper
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 No tool in the tool gripper 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
During collection of a tool from one of the magazines using the tool loader the tool gripper was closed, but there was no tool in it. The PLC input signal "No tool in tool gripper" is still present. The tool change procedure is stopped. 1. Check why no tool is in the tool gripper, although one should be there. 2. Check the place allocation in the tool management. 3. Check sensor and PLC input signal "No tool in the tool gripper". 4. As soon as the malfunction has been remedied, press one of the following keys: [FEED START] [CYCLE START] Message is cleared. The diagnostic overview of the sensor signals can be found under: Chapter 2.2 ‘Tool changer diagnostics menu’ on page 11
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 701606 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701606.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026