代码 701618: Check sensor: >No tool present (tool gripper)<
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Check sensor: >No tool present (tool gripper)< 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
A tool has been deposited in the background magazine or in the magazine chain, but it was noticed that the PLC input signal “No tool available in the tool gripper“ is not indicating. After depositing a tool, the sensor is checked for the signal status (1) with opened tool gripper and the tool gripper in the home position. Error messages Tool change Check sensor: >No tool present (tool gripper)< The tool change procedure is stopped. 1. Check sensor and PLC input signal "No tool in the tool gripper". 2. As soon as the malfunction is remedied, press one of the following keys: [FEED START] [CYCLE START] Message is cleared. The diagnostic overview of the sensor signals can be found under: Chapter 2.2 ‘Tool changer diagnostics menu’ on page 11
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 701618 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 701618.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026