代码 702230: Check tool revolver reference point (sensor=1 == place 1)
问题描述与安全警告
Chiron Siemens-Control CNC 触发了严重的 Check tool revolver reference point (sensor=1 == place 1) 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
It was determined that tool place 1 is in the machining position of the tool revolver and the PLC input signal "Tool revolver reference point" is registered. It was determined that tool place 1 is not in the machining position of the tool revolver and the PLC input signal "Tool revolver reference point" is not registered. Follow-up message Tool revolver slip clutch not engaged or Tool in the tool revolver not defined. Causes The error has the following effect: Feed Stop No axis movements possible. "Spindle Stop" Tool spindle is stopped. Speed no longer possible. 1. Put tool revolver at tool place 1 with manual functions. 2. Check the reference point. 3. PLC input signal "Tool revolver reference point" must not be registered. 4. Once the malfunction has been remedied, press [FEED START] key. Message is cleared.
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Chiron Siemens-Control CNC 警报
由 Chiron 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Siemens-Control CNC 出现类似 702230 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 545 Chiron Siemens-Control CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 702230.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026