代碼 702700: Safety: PLC-MD wrong (table type configuration)
問題描述與安全警告
Chiron Siemens-Control CNC 觸發了嚴重的 Safety: PLC-MD wrong (table type configuration) 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
The configuration of the table design (S, W, or L machine) is not OK. The PLC machine parameter (PLC-MD) for the table design configuration does not agree with the PLC flag for the table design. Not possible to switch on the machine control. Error messages Safety technology Safety: PLC-MD wrong (table type configuration) 1. Set the machine parameter according to the table design. 2. As soon as the PLC machine parameter is active, press the following key: [RESET] Message is cleared. 3. The machine control can be activated again. S machine: Flag 2.0 and PLC-MD 14512[56]Bit 1 = 1 W machine: Flag 2.1 and PLC-MD 14512[56]Bit 2 = 1 L machine: Flag 2.2 and PLC-MD 14512[56]Bit 3 = 1
Source: CHIRON Error Message Overview, all series (Siemens control, V2.0.6, 2012)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Chiron Siemens-Control CNC 警報
由 Chiron 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 Siemens-Control CNC 出現類似 702700 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 545 Chiron Siemens-Control CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 702700.
Need a searchable reference for more Chiron Siemens-Control CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026