代碼 197: C–AXIS COMMANDED IN SPINDLE MODE
問題描述與安全警告
Fanuc 16i/18i/21i CNC 觸發了嚴重的 C–AXIS COMMANDED IN SPINDLE MODE 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
The program specified a movement along the Cs–axis when the signal CON(DGN=G027#7) was off. Correct the program, or consult the PMC ladder diagram to find the reason the signal is not turned on.
Source: Fanuc Series 16i/18i/21i-B Operator's Manual, Appendix G Alarm List (B-63864EN/03)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Fanuc 16i/18i/21i CNC 警報
由 Fanuc 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 16i/18i/21i CNC 出現類似 197 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 360 Fanuc 16i/18i/21i CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 197.
Need a searchable reference for more Fanuc 16i/18i/21i CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026