コード END3: , which will not be executed. OVERLAPPED JMP
問題の説明と安全警告
Fanuc 30i/31i/32i CNC は重大な , which will not be executed. OVERLAPPED JMP アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
If JMPE is missing, add it in proper position. If the JMP is unnecessary, remove it. There is no JMPE that corresponds to this JMP. JMP/JMPE TO BAD COM LEVEL JMP and corresponding JMPE must have same COM/COME status. Review JMP range and COM range, to adjust not to overlap with each other: it is possible that one range includes the other completely. JMP and corresponding JMPE have different COM/COME status. COME IN JMP COME and corresponding COM must have same JMP/JMPE status. Review COM range and JMP range, to adjust not to overlap with each other: it is possible that one range includes the other completely. COME is found between JMP and JMPE, and COM and corresponding COME have different JMP/JMPE status. END IN JMP
Source: Fanuc Series 30i/31i/32i-A Maintenance Manual, Appendix A Alarm List — PMC alarms (B-64485EN/01)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Fanuc 30i/31i/32i CNC のアラームについて
Fanuc によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。30i/31i/32i CNC が END3 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 85 Fanuc 30i/31i/32i CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code END3.
Need a searchable reference for more Fanuc 30i/31i/32i CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026