代碼 END3: , which will not be executed. OVERLAPPED JMP
問題描述與安全警告
Fanuc 30i/31i/32i CNC 觸發了嚴重的 , which will not be executed. OVERLAPPED JMP 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
If JMPE is missing, add it in proper position. If the JMP is unnecessary, remove it. There is no JMPE that corresponds to this JMP. JMP/JMPE TO BAD COM LEVEL JMP and corresponding JMPE must have same COM/COME status. Review JMP range and COM range, to adjust not to overlap with each other: it is possible that one range includes the other completely. JMP and corresponding JMPE have different COM/COME status. COME IN JMP COME and corresponding COM must have same JMP/JMPE status. Review COM range and JMP range, to adjust not to overlap with each other: it is possible that one range includes the other completely. COME is found between JMP and JMPE, and COM and corresponding COME have different JMP/JMPE status. END IN JMP
Source: Fanuc Series 30i/31i/32i-A Maintenance Manual, Appendix A Alarm List — PMC alarms (B-64485EN/01)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Fanuc 30i/31i/32i CNC 警報
由 Fanuc 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 30i/31i/32i CNC 出現類似 END3 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 85 Fanuc 30i/31i/32i CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code END3.
Need a searchable reference for more Fanuc 30i/31i/32i CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026