Code ER09: PMC LABEL CHECK ERROR
Issue Description & Safety Warning
The Fanuc 30i/31i/32i CNC has triggered a critical PMC LABEL CHECK ERROR alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
(1) Turn on the power of the CNC again, by holding down the 'O' and 'Z' keys at the same time. (2) Replace the backup batteries. The nonvolatile memory of the PMC system needs to be initialized in such cases as when you have changed the PMC model.
Source: Fanuc Series 30i/31i/32i-A Maintenance Manual, Appendix A Alarm List — PMC alarms (B-64485EN/01)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Fanuc 30i/31i/32i CNC Alarms
Fanuc controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code ER09 on the 30i/31i/32i CNC identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Fanuc's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 85 Fanuc 30i/31i/32i CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code ER09.
Need a searchable reference for more Fanuc 30i/31i/32i CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026