コード SEAL-220: Volume out of range (E%s)
問題の説明と安全警告
Fanuc R-30i Series Robot Controller は重大な Volume out of range (E%s) アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Cause: The volume dispensed in the last job was out of the normal volumetric range of material dispensed for this job. This could be caused by terminating the job early, causing much less material to be dispensed. This could also be caused by problems with the material, such as using material which has exceeded its shelf life. Remedy: This warning is normal if it was caused by terminating a job early. If this error happens during normal production, examine the quality of the dispensed job and verify that the dispenser and material are in good condition.
Source: FANUC Robot R-30iA Alarm Code List Operator's Manual
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Fanuc R-30i Series Robot Controller のアラームについて
Fanuc によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。R-30i Series Robot Controller が SEAL-220 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
Have a better solution?
Help the industrial community by sharing your repair experience for code SEAL-220.
Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026