代碼 SPOT-047: Collision Detection Alarm
問題描述與安全警告
Fanuc R-30i Series Robot Controller 觸發了嚴重的 Collision Detection Alarm 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Cause: A Collision Detection Alarm has been detected. The robot might have collided with an object, or a Tip Stick might have occurred. Remedy: Carefully jog the robot away from the interfering objects, or free the weld gun from the Tip Stick. Verify that the Collision Guard option is not set too sensitive. Using the teach pendant: 1. Press MENUS. 2. Select SETUP. 3. Press F1, [TYPE]. 4. Select COL GUARD. Verify that the payload settings are accurate and do not exceed the capacity of the mechanical unit. Check the payload settings by using the teach pendant: 1. Press MENUS. 2. Press SYSTEM. 3. Press F1, [TYPE]. 4. Select Motion.
Source: FANUC Robot R-30iA Alarm Code List Operator's Manual
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Fanuc R-30i Series Robot Controller 警報
由 Fanuc 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 R-30i Series Robot Controller 出現類似 SPOT-047 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
Have a better solution?
Help the industrial community by sharing your repair experience for code SPOT-047.
Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026