Code SRVO-223: DSP dry run (%d,%d)

Cause: A servo DSP initialization failure occurred and the software entered DSP dry run mode. The first number indicates the cause of the failure. The second number is extra information. Remedy: Perform an action according to the first number that is displayed in the alarm message. 1: This is a warning due to $scr.$startup_cnd=12. 2,3,4,7: Replace a servo card. 5,6: Invalid ATR setting. Specified hardware start axis might be wrong. 8,10: FSSB init error occurs simultaneously. Follow the remedy of FSSB init error. 9: There is no amplifier that is connected to the servo card. Check the hardware connection and optical fiber cable. 11: Invalid axisorder setting. Non-existing axis number is specified. Hardware start axis may be wrong or auxiliary axis board is necessary. 12: Servo amp init error occurs simultaneously. Follow the remedy of servo amp init error.