代碼 TPIF-215: iPendant login unsuccessful
問題描述與安全警告
Fanuc R-30i Series Robot Controller 觸發了嚴重的 iPendant login unsuccessful 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Cause: An error occurred trying to log in as an iPendant connection. Remedy: If you are using Internet Explorer, verify the settings. The PC must have Microsoft™ Internet Explorer 5.5 or greater installed. The PC must have the iPendant Controls installed. The PC must be connected to a network, and be properly configured to allow a TCP/IP connection to and from the robot controller. If you are using a proxy server, make sure that your access to the robot does not go through the proxy server. Verify that cookies are enabled. If using a robot name instead of an IP address, verify that “_” is not in the robot name.
Source: FANUC Robot R-30iA Alarm Code List Operator's Manual
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Fanuc R-30i Series Robot Controller 警報
由 Fanuc 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 R-30i Series Robot Controller 出現類似 TPIF-215 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
Have a better solution?
Help the industrial community by sharing your repair experience for code TPIF-215.
Need a searchable reference for more Fanuc R-30i Series Robot Controller manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026