Volver a todos los modelos de Fanuc Search all database
Fanuc R-30i Series Robot Controller
Códigos de error de Fanuc R-30i Series Robot Controller
Referencia completa de códigos de alarma y error para Fanuc R-30i Series Robot Controller. Explore a continuación los 6553 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Fanuc R-30i Series Robot Controller
Search all 6553 Fanuc R-30i Series Robot Controller codes without changing pages.
Lista completa de alarmas (Page 12 of 33)
Código IBSS-080
Module count or offset er
Ver solución Código IBSS-081
Out Mod No <> out ofs
Ver solución Código IBSS-082
In Mod No <> in ofs
Ver solución Código IBSS-083
Real out len <> cfg len
Ver solución Código IBSS-084
Real in len <> cfg len
Ver solución Código IBSS-085
Overlapped output data
Ver solución Código IBSS-086
Overlapped input data
Ver solución Código IBSS-087
Out Dev define In module
Ver solución Código IBSS-088
In Dev define Out module
Ver solución Código IBSS-089
Out Dev define In module
Ver solución Código IBSS-090
In Dev define Out module
Ver solución Código IBSS-091
Installation depth error
Ver solución Código IBSS-092
Length code is unknown
Ver solución Código IBSS-093
Remove non exist device
Ver solución Código IBSS-094
Device is active
Ver solución Código IBSS-095
Config is differ from msg
Ver solución Código IBSS-101
Not match Configuration list
Ver solución Código IBSS-102
Too many device are connected
Ver solución Código IBSS-103
Configuration change (ID-scan)
Ver solución Código IBSS-104
Multi data cycle error
Ver solución Código IBSS-105
InterBus Timeout process cycle
Ver solución Código IBSS-106
Device missing in setup config
Ver solución Código IBSS-107
Configuration change (runtime)
Ver solución Código IBSS-108
No connection to InterBus-S
Ver solución Código IBSS-150
Sequence error
Ver solución Código IBSS-170
No warm start command
Ver solución Código IBSS-171
Too many modules configured
Ver solución Código IBSS-172
More module are connected
Ver solución Código IBSS-173
Less module are connected
Ver solución Código IBSS-174
Non supported length code
Ver solución Código IBSS-175
Wrong length code
Ver solución Código IBSS-176
Wrong ident code
Ver solución Código IBSS-177
Wrong segment level
Ver solución Código IBSS-178
Master Watch dog error
Ver solución Código IBSS-200
Slave No data Exchange
Ver solución Código IBSS-201
Slave board not installed
Ver solución Código IBSS-202
Too many board installed
Ver solución Código IBSS-203
Init Error %d
Ver solución Código IBSS-204
Runtime Error %d
Ver solución Código IBSS-205
Please power off for Slave
Ver solución Código IBSS-206
Firmware Updating Mode
Ver solución Código IBSS-207
Firmware update successful
Ver solución Código IBSS-208
Firmware update failed %d
Ver solución Código IBSS-209
Firmware file error %d
Ver solución Código IBSS-210
No firmware
Ver solución Código IBSS-211
System Error %d %d
Ver solución Código IBSS-212
Slave PCB abnormal
Ver solución Código IBSS-213
Error code %x
Ver solución Código IBSS-214
PCP Init Error %d
Ver solución Código IBSS-215
PCP Init Stopped %d
Ver solución Código IBSS-216
DIO size to UOP not enough
Ver solución Código IBSS-220
HOST watchdog failed, timeout
Ver solución Código IBSS-221
HOST not acknowledge process
Ver solución Código IBSS-224
Error in IBS Controller comm
Ver solución Código IBSS-260
bit len is set with byte len
Ver solución Código IBSS-263
InterBus has no I/O assignment
Ver solución Código IBSS-264
Set system pointer failed
Ver solución Código IBSS-300
%s:Bus error
Ver solución Código IBSS-301
%s:Max. number was exceeded
Ver solución Código IBSS-302
%s:Too many faulty data cycle
Ver solución Código IBSS-303
%s:Configuration not activated
Ver solución Código IBSS-304
%s:Control_Device_Function
Ver solución Código IBSS-305
%s:CRC error in segment
Ver solución Código IBSS-306
%s:Error at interface (In)
Ver solución Código IBSS-307
%s:Bus error occurred
Ver solución Código IBSS-308
%s:Device is missing
Ver solución Código IBSS-309
%s:Multiple errors in segment
Ver solución Código IBSS-310
%s:Multiple timeouts in segment
Ver solución Código IBSS-311
%s:CRC error (In)
Ver solución Código IBSS-312
%s:Defective interface (In)
Ver solución Código IBSS-313
%s:Error at interface (In)
Ver solución Código IBSS-314
%s:Interrupted interface (In)
Ver solución Código IBSS-315
%s:Transmission error
Ver solución Código IBSS-316
%s:Error in segment
Ver solución Código IBSS-317
%s:Wrong length code
Ver solución Código IBSS-318
%s:Wrong ID code
Ver solución Código IBSS-319
%s:Data register error
Ver solución Código IBSS-320
%s:Invalid ID code
Ver solución Código IBSS-321
%s:Remote device in local bus
Ver solución Código IBSS-322
%s:Device not possible
Ver solución Código IBSS-323
%s:Defective interface (Out1)
Ver solución Código IBSS-324
%s:Defective interface (Out2)
Ver solución Código IBSS-325
%s:Interrupted interf. (Out1)
Ver solución Código IBSS-326
%s:Interrupted interf. (Out2)
Ver solución Código IBSS-327
%s:I/O timeout
Ver solución Código IBSS-328
%s:Reset of device
Ver solución Código IBSS-329
%s:Device not initialized yet
Ver solución Código IBSS-330
%s:Invalid mode at device
Ver solución Código IBSS-331
%s:Wrong data length
Ver solución Código IBSS-332
%s:Wrong ID code (PCP)
Ver solución Código IBSS-333
%s:Inadmissible width (PCP)
Ver solución Código IBSS-334
%s:Dynamic PCP cannot be used
Ver solución Código IBSS-335
%s:State conflict (On)
Ver solución Código IBSS-336
%s:State conflict (Off)
Ver solución Código IBSS-337
%s:Operation not possible
Ver solución Código IBSS-338
%s:Multiple errors (Out1)
Ver solución Código IBSS-339
%s:Multiple timeout (Out1)
Ver solución Código IBSS-340
%s:Further device at bus
Ver solución Código IBSS-341
%s:Data register error (Out1)
Ver solución Código IBSS-342
%s:Defective interface (Out1)
Ver solución Código IBSS-343
%s:Further local bus device
Ver solución Código IBSS-344
%s:Invalid ID code (Out1)
Ver solución Código IBSS-345
%s:Too many devices at local bus
Ver solución Código IBSS-346
%s:Multiple errors (Out2)
Ver solución Código IBSS-347
%s:Multiple timeouts (Out2)
Ver solución Código IBSS-348
%s:Further device at (Out2)
Ver solución Código IBSS-349
%s:Data register error (Out2)
Ver solución Código IBSS-350
%s:Too many devices activated
Ver solución Código IBSS-351
%s:Error in local bus
Ver solución Código IBSS-352
%s:Too many devices in local bus
Ver solución Código IBSS-353
%s:Invalid ID code (Out2)
Ver solución Código IBSS-354
%s:Error on channel
Ver solución Código IBSS-355
%s:Short circuit at output
Ver solución Código IBSS-356
%s:Initiator supply error
Ver solución Código IBSS-357
%s:Power supply error
Ver solución Código IBSS-358
%s:Configuration error
Ver solución Código IBSS-359
%s:Peripheral electronic error
Ver solución Código IBSS-360
%s:Temperature excess
Ver solución Código IBSS-361
%s:Loop error (Out2)
Ver solución Código IBSS-362
%s:Isolated disconnection error
Ver solución Código IBSS-380
%s:Look for Failure
Ver solución Código IBSS-381
%s:Peripheral warning
Ver solución Código IBSS-382
%s:Control Fault
Ver solución Código IBSS-383
%s:User Fault
Ver solución Código IBSS-384
%s:User Fault (%s)
Ver solución Código IBSS-390
%s:Controller Board Error
Ver solución Código IBSS-391
%s:Board has not enough memory
Ver solución Código IBSS-392
%s:Board checksum error
Ver solución Código IBSS-393
%s:Board system error
Ver solución Código IBSS-394
%s:is reported by firmware
Ver solución Código IBSS-395
%s: Can't execute service
Ver solución Código IBSS-396
Board status is READY
Ver solución Código IBSS-397
Board status is ACTIVE
Ver solución Código IBSS-398
Board status is RUN
Ver solución Código IBSS-399
Board status is Bus Fail
Ver solución Código IBSS-400
%s:Service called w/o Rights
Ver solución Código IBSS-401
%s:Firmw.command busy now
Ver solución Código IBSS-402
%s:Board error reported
Ver solución Código IBSS-403
%s:Firmware error reported
Ver solución Código IBSS-404
%s:Bus warning time elapsed
Ver solución Código IBSS-405
%s:Wrong Variable ID
Ver solución Código IBSS-420
%s:1st Seg. Unswitchable
Ver solución Código IBSS-421
%s:Can't enable multiple Alt.Group
Ver solución Código IBSS-422
%s:Dev dependency conflict
Ver solución Código IBSS-423
%s:Can't take Exclusive Rights
Ver solución Código IBSS-424
Peripheral warning exists
Ver solución Código IBSS-425
Peripheral warning cleared
Ver solución Código IBSS-447
Seg.%d at outgoing remote bus
Ver solución Código IBSS-448
Seg.%d at outgoing local bus
Ver solución Código IBSS-449
%d.%d device not found
Ver solución Código IBSS-450
%d.%d %s
Ver solución Código IBSS-451
Additional Info %s
Ver solución Código IBSS-452
Slave No data Exchange
Ver solución Código IBSS-453
Bus Fault is indicated
Ver solución Código IBSS-454
CMD mode is selected
Ver solución Código IBSS-455
TP mode is selected
Ver solución Código IBSS-456
Device %d is inserted
Ver solución Código IBSS-457
Device %d is deleted
Ver solución Código IBSS-458
Please power OFF/ON for Master
Ver solución Código IBSS-459
Too many device
Ver solución Código IBSS-461
Can't swich at READY state
Ver solución Código IBSS-462
Parameterization is performed
Ver solución Código IBSS-463
Load SVC successful
Ver solución Código IBSS-464
Clear parm mem is performed
Ver solución Código IBSS-465
Load Config is performed
Ver solución Código IBSS-466
Board not ready
Ver solución Código IBSS-467
BackUp %d board files (%s)
Ver solución Código IBSS-468
Slave external power off
Ver solución Código IBSS-469
Slave not Init/Ready
Ver solución Código IBSS-470
Slave DIP setting mismatch
Ver solución Código IBSS-471
Firmware version mismatch
Ver solución Código IBSS-472
Please power OFF/ON for Slave
Ver solución Código IBSS-473
Parameterization not finished
Ver solución Código IBSS-474
“Use CMD” setting mismatch
Ver solución Código IBSS-475
PCI board not installed
Ver solución Código IBSS-476
newmem %d failed
Ver solución Código IBSS-477
mktsk %d failed %d
Ver solución Código IBSS-478
Slave Parameterization invalid
Ver solución Código IBSS-479
Firmware Updating Mode
Ver solución Código IBSS-480
Sysfail Reset Failed
Ver solución Código IBSS-481
MPM1 Ready Bit OFF
Ver solución Código IBSS-482
Alternative Recovery Disabled
Ver solución Código IBSS-483
Execute param. for Baud-Rate
Ver solución Código IBSS-484
Slave : Power off, Discon. 24V
Ver solución Código IBSS-485
Power off or Execute param.
Ver solución Código IBSS-486
Power OFF/ON is necessary
Ver solución Código IBSS-487
Trying to reset Bus Fault
Ver solución Código IBSS-488
Master is not running
Ver solución Código IBSS-489
Update Dev. Name by Load Conf.
Ver solución Código IBSS-490
Parameterization by SVC failed
Ver solución Código IBSS-491
SVC file is not loaded
Ver solución Código IBSS-492
Alternative is not recovered
Ver solución Código IBSS-493
Firmware reply %s timeout
Ver solución Código IBSS-494
Slave err1shot is disabled
Ver solución Código IBSS-495
Failed to enable byte swap
Ver solución Código IBSS-496
len/ofs not multiple of 16
Ver solución Código IBSS-497
Failed to change len/ofs
Ver solución Código IBSS-498
len/ofs must be multiple of 16
Ver solución Código IBSS-500
Analog I/O setting is invalid
Ver solución Código IBSS-501
Welding I/O setting is invalid
Ver solución