Volver a todos los modelos de Fanuc Search all database
Fanuc R-30i Series Robot Controller
Códigos de error de Fanuc R-30i Series Robot Controller
Referencia completa de códigos de alarma y error para Fanuc R-30i Series Robot Controller. Explore a continuación los 6553 códigos de falla documentados, cada uno con un enlace a una guía detallada de solución de problemas.
Search this section
Search Fanuc R-30i Series Robot Controller
Search all 6553 Fanuc R-30i Series Robot Controller codes without changing pages.
Lista completa de alarmas (Page 5 of 33)
Código CVIS-017
Invalid file name
Ver solución Código CVIS-018
The mask size is bad
Ver solución Código CVIS-019
The window size is bad
Ver solución Código CVIS-020
Big circles cannot be distinguished
Ver solución Código CVIS-021
Exceed VisPool(%d Bytes)
Ver solución Código CVIS-022
Focal length and Z distance could not be calculated
Ver solución Código CVIS-030
The model pattern is not trained.
Ver solución Código CVIS-031
There are not enough features in the training window.
Ver solución Código CVIS-032
Bad arguments.
Ver solución Código CVIS-033
The operation has timed out.
Ver solución Código CVIS-034
The emphasis area is not trained.
Ver solución Código CVIS-035
The emphasis area is too large.
Ver solución Código CVIS-036
The emphasis area is too small.
Ver solución Código CVIS-037
The model pattern is not symmetrical.
Ver solución Código CVIS-038
Too many candidates to process.
Ver solución Código CVIS-039
The mask doesn't fit the model pattern.
Ver solución Código CVIS-040
The mask doesn't fit the search window.
Ver solución Código CVIS-041
File version error.
Ver solución Código CVIS-042
File is corrupted.
Ver solución Código CVIS-043
The search window is too small.
Ver solución Código CVIS-050
Exposure is invalid
Ver solución Código CVIS-051
Laser window is invalid
Ver solución Código CVIS-052
Calibration data is not perspective
Ver solución Código CVIS-053
Calculation is not converged.
Ver solución Código CVIS-054
Laser line is not found.
Ver solución Código CVIS-055
Not enough laser points for calculation.
Ver solución Código CVIS-056
Laser plane is not found.
Ver solución Código CVIS-057
Zero vector is used in calculation.
Ver solución Código CVIS-058
Input data is out of range.
Ver solución Código CVIS-059
Leaning angle exceeded limit.
Ver solución Código CVIS-060
No features in image
Ver solución Código CVIS-061
Parameter is not initialized
Ver solución Código CVIS-062
Target is rotated too much
Ver solución Código CVIS-063
Target is too close
Ver solución Código CVIS-064
Target is too far away
Ver solución Código CVIS-065
Target is tilted too much
Ver solución Código CVIS-066
Contrast is too low
Ver solución Código CVIS-067
Target is not clear
Ver solución Código CVIS-068
Mastering calculation is failed
Ver solución Código CVIS-069
Data is not for vision shift
Ver solución Código CVIS-070
Remove Vision Board
Ver solución Código CVIS-079
Vision log timeout
Ver solución Código CVIS-080
The camera is busy
Ver solución Código CVIS-081
Invalid camera type specified
Ver solución Código CVIS-082
Invalid image object passed
Ver solución Código CVIS-083
Exposure time is out of range
Ver solución Código CVIS-084
Invalid camera port specified
Ver solución Código CVIS-085
Camera time out
Ver solución Código CVIS-086
Camera is not 3D laser sensor
Ver solución Código CVIS-087
DEPICT error
Ver solución Código CVIS-088
Vision FPGA version error
Ver solución Código CVIS-089
Camera is not initialized
Ver solución Código CVIS-090
Vision DMA error
Ver solución Código CVIS-091
The auto exposure setting is not trained
Ver solución Código CVIS-092
The auto exposure setting is too bright
Ver solución Código CVIS-093
The auto exposure setting is too dark
Ver solución Código CVIS-094
The auto exposure setting is bad
Ver solución Código CVIS-095
This Board has no CAMERA I/F
Ver solución Código CVIS-096
Multi exposure exceeded the limit. Number of exposures will be modified at execution
Ver solución Código CVIS-097
Area is not trained. Area is reset.
Ver solución Código CVIS-098
The camera is disconnected
Ver solución Código CVIS-099
Not support this config of MUX
Ver solución Código CVIS-100
A vision data file with that name already exists.
Ver solución Código CVIS-101
The vision data file does not exist.
Ver solución Código CVIS-102
Invalid vision data pointer
Ver solución Código CVIS-103
The vision data file is already open for writing.
Ver solución Código CVIS-104
No more vision data found
Ver solución Código CVIS-105
Cannot delete the vision data file because it is open.
Ver solución Código CVIS-106
Cannot rename the vision data file because it is open.
Ver solución Código CVIS-107
Cannot save the vision data file because it is open.
Ver solución Código CVIS-108
Tool type not found
Ver solución Código CVIS-109
Interface not supported
Ver solución Código CVIS-110
Double registration
Ver solución Código CVIS-111
The vision data file is corupted.
Ver solución Código CVIS-112
Parent camera view not found
Ver solución Código CVIS-113
The vision data file is too old to load.
Ver solución Código CVIS-114
The vision data file is too new to load.
Ver solución Código CVIS-115
Invalid vision data name
Ver solución Código CVIS-116
There is not enough space on the disk.
Ver solución Código CVIS-117
Cannot insert this tool
Ver solución Código CVIS-118
Target Controller has no vision
Ver solución Código CVIS-119
The vision program can not output this vision parameter.
Ver solución Código CVIS-120
Could not log data
Ver solución Código CVIS-121
Could not log image
Ver solución Código CVIS-122
Log file is corrupted
Ver solución Código CVIS-123
Unknown tag specified to log
Ver solución Código CVIS-124
Bad log file open mode
Ver solución Código CVIS-125
Log record is full
Ver solución Código CVIS-126
No more elements in log record
Ver solución Código CVIS-127
Invalid index specified
Ver solución Código CVIS-128
Specified tag not found
Ver solución Código CVIS-129
Unknown tag found in log file
Ver solución Código CVIS-130
No free disk space to log
Ver solución Código CVIS-131
Resume data logging
Ver solución Código CVIS-132
Cannot log because of bad clock setup
Ver solución Código CVIS-133
Missing my work area
Ver solución Código CVIS-134
Line data is not trained
Ver solución Código CVIS-135
This tool is not trained.
Ver solución Código CVIS-136
Please enter a valid robot IP address.
Ver solución Código CVIS-137
The robot name '%s' or ip address is already in use.
Ver solución Código CVIS-139
Cannot delete this tool.
Ver solución Código CVIS-140
The value %s is out of range. The valid range is %s to %s.
Ver solución Código CVIS-141
The tool name '%s' is already in use.
Ver solución Código CVIS-144
The name has been truncated to '%s'.
Ver solución Código CVIS-145
The image display is in live mode.¥n (Exit mode by pressing the red Snap button.)
Ver solución Código CVIS-146
There is no image.
Ver solución Código CVIS-147
Load failed for %s.
Ver solución Código CVIS-148
There are no found results.
Ver solución Código CVIS-150
Camera view index out of range
Ver solución Código CVIS-151
No more vision offsets
Ver solución Código CVIS-152
Failed to set ref. position
Ver solución Código CVIS-153
Ref. position has not been set
Ver solución Código CVIS-154
Reference data does not exist
Ver solución Código CVIS-155
Bad vision process name
Ver solución Código CVIS-156
Vision process was not found
Ver solución Código CVIS-157
Camera does not exist
Ver solución Código CVIS-158
Camera calib. does not exist
Ver solución Código CVIS-159
Inappropriate request to tool
Ver solución Código CVIS-160
Find has not been executed
Ver solución Código CVIS-161
No camera setup is selected
Ver solución Código CVIS-162
No camera calibration selected
Ver solución Código CVIS-163
No reference robot position for tool offset
Ver solución Código CVIS-164
No robot position for robot mounted camera
Ver solución Código CVIS-165
No robot position for tool offset
Ver solución Código CVIS-166
Vision Standard DEMO expired
Ver solución Código CVIS-167
Target Controller is too old to communicate
Ver solución Código CVIS-168
Target Controller is off-line
Ver solución Código CVIS-169
Object is not found in some camera view(s).
Ver solución Código CVIS-170
Combine error exceed the limit.
Ver solución Código CVIS-171
Calibration must be perspective.
Ver solución Código CVIS-172
Robot Pos(Z) is different from Calib Pos.
Ver solución Código CVIS-173
Robot Pos(WP) is different from Calib Pos.
Ver solución Código CVIS-174
Robot Pos(Z) is different from Reference Pos.
Ver solución Código CVIS-175
Robot Pos(WP) is different from Reference Pos.
Ver solución Código CVIS-176
Application-Z has been changed after SetRef.
Ver solución Código CVIS-177
Error occurred in Camera View %d.
Ver solución Código CVIS-178
Not Available
Ver solución Código CVIS-179
Not Available
Ver solución Código CVIS-180
No images found for image playback.
Ver solución Código CVIS-181
End of image playback.
Ver solución Código CVIS-182
VOFFSET type is wrong.
Ver solución Código CVIS-183
Vision Board does not exist.
Ver solución Código CVIS-184
GET_OFFSET command is conflicted.
Ver solución Código CVIS-185
No visual tracking option
Ver solución Código CVIS-186
No line tracking option
Ver solución Código CVIS-187
VOFFSET(frame offset) is duplicated
Ver solución Código CVIS-188
VOFFSET(tool offset) is duplicated
Ver solución Código CVIS-189
Vision Register is locked
Ver solución Código CVIS-191
The comment string has been truncated to '%s'.
Ver solución Código CVIS-194
The sorting parameters are not completely defined. Please select all sorting parameters.
Ver solución Código CVIS-195
The sorting parameters are now invalid.¥n They have been reset to the default values.
Ver solución Código CVIS-197
This tool was not found
Ver solución Código CVIS-198
Layer threshold exceeded limit
Ver solución Código CVIS-199
Layer output number is used elsewhere
Ver solución Código CVIS-200
The camera calibration tool is not trained.
Ver solución Código CVIS-201
The camera calibration tool is corrupted.
Ver solución Código CVIS-202
The camera calibration tool is corrupted.
Ver solución Código CVIS-203
Invalid calibration plane number.
Ver solución Código CVIS-204
Either camera or fixture needs to be mounted on a robot.
Ver solución Código CVIS-205
Both camera and fixture should not be mounted on a robot.
Ver solución Código CVIS-206
No robot position for robot mounted camera.
Ver solución Código CVIS-207
No robot position for robot mounted fixture.
Ver solución Código CVIS-208
No robot position for robot mounted fixture.
Ver solución Código CVIS-209
The calibration points are too close to each other.
Ver solución Código CVIS-210
The calibration points are too close to each other.
Ver solución Código CVIS-211
The calibration points are too close to each other.
Ver solución Código CVIS-212
No robot position for robot mounted camera.
Ver solución Código CVIS-213
Robot positions for two points must be the same.
Ver solución Código CVIS-214
Laser calibration fails.
Ver solución Código CVIS-215
Laser frame cannot be calculated.
Ver solución Código CVIS-216
Laser window is not trained.
Ver solución Código CVIS-217
No laser image.
Ver solución Código CVIS-218
No found pose of parent locator tool.
Ver solución Código CVIS-219
Histogram tool is not trained.
Ver solución Código CVIS-220
Histogram tool: Fail to get reference position.
Ver solución Código CVIS-221
Histogram tool: Fail to set reference position.
Ver solución Código CVIS-222
Sub tool is not trained.
Ver solución Código CVIS-223
Conditional Execution: Fail to set measurement.
Ver solución Código CVIS-224
Camera is too tilted with respect to Application UF.
Ver solución Código CVIS-225
Conditional Execution is not trained
Ver solución Código CVIS-226
Conditional Execution: Fail to get value.
Ver solución Código CVIS-227
No found pose of parent locator tool.
Ver solución Código CVIS-228
The calibration planes are too close.
Ver solución Código CVIS-229
Model ID mismatch.
Ver solución Código CVIS-230
Reference data is not set.
Ver solución Código CVIS-231
Identical reference values exist for different Z.
Ver solución Código CVIS-232
No robot position for reference scale is set.
Ver solución Código CVIS-233
Robot pose must not be changed.
Ver solución Código CVIS-234
Robot-mounted camera is not supported.
Ver solución Código CVIS-235
Encoder count is not consistent with the current image.
Ver solución Código CVIS-236
Encoder count of this robot is different from that of another robot.
Ver solución Código CVIS-237
The points are too close together to calculate the frame.
Ver solución Código CVIS-238
Double GetQueue from the robot.
Ver solución Código CVIS-239
Invalid timing mode for visual tracking.
Ver solución Código CVIS-240
Vision overtimes against conveyer movement.
Ver solución Código CVIS-241
No found pose of parent locator tool.
Ver solución Código CVIS-242
Caliper tool is not trained.
Ver solución Código CVIS-243
Caliper tool: Fail to get reference position.
Ver solución Código CVIS-244
Caliper tool: Fail to set reference position.
Ver solución Código CVIS-245
Blob Locator tool: Fail to get reference position.
Ver solución