代碼 115: Turret Rotate Fault
問題描述與安全警告
Haas VF-Series CNC 觸發了嚴重的 Turret Rotate Fault 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
During a tool changer operation the tool turret failed to start moving, failed to stop moving or failed to stop at the right position. Parameters 60 and 61 can adjust the delays. This alarm can be caused by anything that jams the rotation of the turret. A loss of power to the tool changer can also cause this. Check relays K9-K12, and fuse F1 on IOPCB.
Source: Haas VF-Series Service Manual (96-8100 rev G, 2003)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Haas VF-Series CNC 警報
由 Haas 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 VF-Series CNC 出現類似 115 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 461 Haas VF-Series CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 115.
Need a searchable reference for more Haas VF-Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026