代碼 127: No Turret Mark
問題描述與安全警告
Haas VF-Series CNC 觸發了嚴重的 No Turret Mark 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
Tool carousel motor not in position. This alarm is only generated at power-on. The AUTO ALL AXES button will correct this but be sure that the pocket facing the spindle afterwards does not contain a tool.
Source: Haas VF-Series Service Manual (96-8100 rev G, 2003)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Haas VF-Series CNC 警報
由 Haas 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 VF-Series CNC 出現類似 127 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 461 Haas VF-Series CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 127.
Need a searchable reference for more Haas VF-Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026