コード 150: Z and Tool Interlocked
問題の説明と安全警告
Haas VF-Series CNC は重大な Z and Tool Interlocked アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
Changer not at home and either the or A or B axis (or any combination) is not at zero. If RESET, E-STOP, or POWER OFF occurs during tool change, Z-axis motion and tool changer motion may not be safe. Check the position of the tool changer and remove the tool if possible. Re-initialize with the AUTO ALL AXES button but be sure that the pocket facing the spindle afterwards does not contain a tool.
Source: Haas VF-Series Service Manual (96-8100 rev G, 2003)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Haas VF-Series CNC のアラームについて
Haas によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。VF-Series CNC が 150 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 461 Haas VF-Series CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 150.
Need a searchable reference for more Haas VF-Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026