コード 238: Automatic Door Fault
問題の説明と安全警告
Haas VF-Series CNC は重大な Automatic Door Fault アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
The automatic door was commanded to operate, but did not complete the operation. The door was: 1) Commanded to close but failed to contact the closed switch in the time allowed, 2) Commanded to open but failed to contact the opened switch (not all doors have an opened switch) in the time allowed, or 3) Commanded to open but did not begin moving in the time allowed. Check the door switch, the door for mechanical binding, and that the door motor and clutch are functioning correctly.
Source: Haas VF-Series Service Manual (96-8100 rev G, 2003)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Haas VF-Series CNC のアラームについて
Haas によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。VF-Series CNC が 238 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 461 Haas VF-Series CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 238.
Need a searchable reference for more Haas VF-Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026