Code 613: Command Not Allowed In Cutter Comp.
Issue Description & Safety Warning
The Haas VF-Series CNC has triggered a critical Command Not Allowed In Cutter Comp. alarm. Immediate attention from a qualified operator or maintenance technician is required to prevent secondary damage to the equipment or spoiled parts during the manufacturing cycle. Always ensure standard safety and LOTO procedures are followed before accessing electrical cabinets.
Official Troubleshooting Steps
At least one command in the highlighted block cannot be executed while cutter compensation is active. M codes such as M06, M46, M50 and M96 are not allowed. Your program must have a G40 and a cutter comp. exit move before the M code.
Source: Haas VF-Series Service Manual (96-8100 rev G, 2003)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
About Haas VF-Series CNC Alarms
Haas controllers include extensive self-diagnostics that flag or halt the machine when a fault is detected. Error code 613 on the VF-Series CNC identifies one specific fault condition — its documented cause and the official corrective steps are listed above, sourced from Haas's service documentation. Always confirm against the manual for your exact machine configuration and follow LOTO procedures before servicing.
Complete Alarm List: 461 Haas VF-Series CNC codes.
Have a better solution?
Help the industrial community by sharing your repair experience for code 613.
Need a searchable reference for more Haas VF-Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026