代码 625: Carousel Positioning Eror
问题描述与安全警告
Haas VF-Series CNC 触发了严重的 Carousel Positioning Eror 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
This alarm is generated by a side mount tool changer if conditions are not correct when: • The carousel or tool arm was started and one or more of the following incorrect conditions existed: The carousel or arm motor already on, arm not at Origin, tool carousel not at TC mark. • The tool carousel was in motion and Tool One Mark was detected but the current pocket facing the spindle was not at pocket one, or the current pocket was at pocket one but Tool One Mark was not detected.
Source: Haas VF-Series Service Manual (96-8100 rev G, 2003)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Haas VF-Series CNC 警报
由 Haas 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 VF-Series CNC 出现类似 625 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 461 Haas VF-Series CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 625.
Need a searchable reference for more Haas VF-Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026