代码 160-013E: Data of the tool carrier kinematics is faulty
问题描述与安全警告
Heidenhain TNC Series CNC 触发了严重的 Data of the tool carrier kinematics is faulty 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
[Cause of error] The tool-carrier kinematic data for the current tool are faulty. Note: Do not run any NC programs in this condition and be careful if you move the axes manually! [Error correction] - Ensure under “KINEMATICS” that a valid file for the toolcarrier kinematics is entered for the desired tool in the tool table. - Acknowledge the error message - Run a TOOL CALL for a tool that has no tool-carrier kinematics assigned or one that has a valid tool-carrier kinematic model. - Inform your service agency.
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Heidenhain TNC Series CNC 警报
由 Heidenhain 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 TNC Series CNC 出现类似 160-013E 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 4497 Heidenhain TNC Series CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 160-013E.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026