コード 160-0170: M89 not supported in combination with FK
問題の説明と安全警告
Heidenhain TNC Series CNC は重大な M89 not supported in combination with FK アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
[Cause of error] It was attempted to execute an FK block while M89 was active. This is not supported. [Error correction] - Edit the NC program. - In order to execute the selected cycle, program M99 for the respective FK blocks instead of M89.
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Heidenhain TNC Series CNC のアラームについて
Heidenhain によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。TNC Series CNC が 160-0170 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 4497 Heidenhain TNC Series CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 160-0170.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026