代码 230-0230: Syntax error in compensation table (%2)
问题描述与安全警告
Heidenhain TNC Series CNC 触发了严重的 Syntax error in compensation table (%2) 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
[Cause of error] The data in the specified compensation table could not be read. [Error correction] - Check the configuration table (*.cma) - Check the compensation table (*.com) The table can contain up to 1024 compensation points (lines). The AXISPOS column of the first and last line must show the beginning and end of the compensation range with respect to the machine datum. The compensation points between them are calculated internally by the control and do not need to be specified. If you enter optional position values in the AXISPOS column they must have equal spacing. If required, in the BACKLASH column enter compensation values that are measured in negative traverse direction. In the column of the associated axis, enter the values belonging to the compensation points. - Inform your service agency 10/2023 [329]
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Heidenhain TNC Series CNC 警报
由 Heidenhain 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 TNC Series CNC 出现类似 230-0230 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 4497 Heidenhain TNC Series CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 230-0230.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026