代碼 230-0230: Syntax error in compensation table (%2)
問題描述與安全警告
Heidenhain TNC Series CNC 觸發了嚴重的 Syntax error in compensation table (%2) 警報。需要由合格的操作員或維修技師立即處理，以防止在製造週期中對設備造成二次損壞或導致零件報廢。在接觸電氣控制箱之前，請務必確保遵循標準安全和停機掛牌 (LOTO) 程序。
官方故障排除步驟
[Cause of error] The data in the specified compensation table could not be read. [Error correction] - Check the configuration table (*.cma) - Check the compensation table (*.com) The table can contain up to 1024 compensation points (lines). The AXISPOS column of the first and last line must show the beginning and end of the compensation range with respect to the machine datum. The compensation points between them are calculated internally by the control and do not need to be specified. If you enter optional position values in the AXISPOS column they must have equal spacing. If required, in the BACKLASH column enter compensation values that are measured in negative traverse direction. In the column of the associated axis, enter the values belonging to the compensation points. - Inform your service agency 10/2023 [329]
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
關於 Heidenhain TNC Series CNC 警報
由 Heidenhain 製造的工業控制器具有廣泛的診斷系統，用於保護內部電路和機械連桿。當 TNC Series CNC 出現類似 230-0230 的錯誤代碼時，通常表示指令值與實際感測器回饋之間存在不匹配。
完整警報清單: 4497 Heidenhain TNC Series CNC 代碼s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 230-0230.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026