Code 231-8A90: Safety module %1

[Cause of error] - Not a safety-oriented control: - The drive cannot be switched on because the safety module is locked - Switch-off of the drive through removal of the external drive enabling at the input of the safety module - Safety module is defective (exchange) - Safety-oriented control: - Drive cannot be switched on because of the operating status of the machine - Drive was switched off because of a change to an illegal operating status of the machine [Error correction] - Inform your service agency - Safety module is connected only to CC: - Switch the external drive enabling over the corresponding input at the safety module (apply 24 V) - Safety modules are connected at MC and CC: - All drives: - Check the function of the protective door contact - Cancel the emergency stop - Only spindle drive: - Check the tool holder (closing) - Check the permissive key - Check the position of the detachable-key switch - Exchange the safety module(s)