コード 231-9550: EnDat2.2 - FS single-encoder system incorrectly
問題の説明と安全警告
Heidenhain TNC Series CNC は重大な EnDat2.2 - FS single-encoder system incorrectly アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
configured %1 [Cause of error] It was configured so that both only the EnDat 2.2 position encoder and only the EnDat 2.2 shaft speed encoder are to be used for functional safety. This is not possible. [Error correction] - Check the entry in Machine Parameter CfgAxisSafety-encoderForSafety: It must either be "speedAndPosEncoder", "speedEncoder" or "posEncoder". - Special settings for single-encoder systems with EnDat 2.2 FS encoders: Set "posEncoder" if only the position encoder is to be used for functional safety or set "speedEncoder" if only the shaft speed encoder is to be used for functional safety - Standard setting: Set "speedAndPosEncoder" if you want to configure a normal dual-encoder system or if the affected axis is run in functional safety with only one encoder (single-encoder safety).
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Heidenhain TNC Series CNC のアラームについて
Heidenhain によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。TNC Series CNC が 231-9550 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 4497 Heidenhain TNC Series CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 231-9550.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026