コード 231-E028: CC%2 MB/PLB does not respond. Device ID: %3
問題の説明と安全警告
Heidenhain TNC Series CNC は重大な CC%2 MB/PLB does not respond. Device ID: %3 アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
[Cause of error] - HSCI components with functional safety (FS) no longer responds (B channel): MB machine operating panel or PLB 6xxx - Component was separated during operation with the HSCI bus - 24 V NC power supply of the component was interrupted - The entered device ID provides information on the affected parameter: 5 = System module on PLB 62xx FS 7 = MB 6xx FS 15 = Expansion PLB (without system module) PLB 61xx FS, PLB 60xx FS 17 = Integrated PLB of the UEC controller unit - Faulty firmware of the PLB or the MB [Error correction] - Check the MB and PLB in the HSCI bus diagnosis - Save service files - Check the HSCI connections - Check the 24 V power supply of the MB and the PLB - Inform your service agency [552] 10/2023
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Heidenhain TNC Series CNC のアラームについて
Heidenhain によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。TNC Series CNC が 231-E028 のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 4497 Heidenhain TNC Series CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 231-E028.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026