代码 231-E028: CC%2 MB/PLB does not respond. Device ID: %3
问题描述与安全警告
Heidenhain TNC Series CNC 触发了严重的 CC%2 MB/PLB does not respond. Device ID: %3 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
[Cause of error] - HSCI components with functional safety (FS) no longer responds (B channel): MB machine operating panel or PLB 6xxx - Component was separated during operation with the HSCI bus - 24 V NC power supply of the component was interrupted - The entered device ID provides information on the affected parameter: 5 = System module on PLB 62xx FS 7 = MB 6xx FS 15 = Expansion PLB (without system module) PLB 61xx FS, PLB 60xx FS 17 = Integrated PLB of the UEC controller unit - Faulty firmware of the PLB or the MB [Error correction] - Check the MB and PLB in the HSCI bus diagnosis - Save service files - Check the HSCI connections - Check the 24 V power supply of the MB and the PLB - Inform your service agency [552] 10/2023
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Heidenhain TNC Series CNC 警报
由 Heidenhain 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 TNC Series CNC 出现类似 231-E028 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 4497 Heidenhain TNC Series CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 231-E028.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026