代码 235-0064: Unknown device on the DriveCLiQ interface (%1)
问题描述与安全警告
Heidenhain TNC Series CNC 触发了严重的 Unknown device on the DriveCLiQ interface (%1) 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
[Cause of error] The NC software identifies every connected devices by means of a device table. The table indicates whether the device is supported by the software version installed on the control. A device that the software does not support or that is not yet entered in the device table is connected over the DriveCLiQ interface. The device concerned is indicated in the additional information. [Error correction] - Inform your service agency - Run an update of the NC software if the device is not supported by the currently installed version of NC software. - Update the device table. A new device that is not yet listed in the device table might be supported by the installed software. In this case an update of the device table is required.
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Heidenhain TNC Series CNC 警报
由 Heidenhain 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 TNC Series CNC 出现类似 235-0064 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 4497 Heidenhain TNC Series CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 235-0064.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026