代碼 239-FFF3: Initialization of interface faulty for device: %2

[Cause of error] The functional safety microcontroller received a test alarm. [Error correction] - Generate the service file - Inform your service agency [23A-0000] [Cause of error] - Error during program run - Invalid error message %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [786] 10/2023 [23A-0001] [Cause of error] - Program or hardware configuration faulty - Test environment is active %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0003] [Cause of error] HSCI PHY: hardware is not responding %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0004] [Cause of error] - Error during program run (NULL pointer) %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0005] [Cause of error] - Parameter transfer invalid - Illegal value %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency 10/2023 [787] [23A-0006] [Cause of error] - Parameter transfer invalid - Illegal argument %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0007] [Cause of error] Received data invalid %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0008] [Cause of error] Device index invalid %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0009] [Cause of error] Internal registration of function: Error during program run %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [788] 10/2023 [23A-000B] [Cause of error] HFL sender: interface at full capacity or not ready for operation %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-000E] [Cause of error] Device is not responding %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0014] [Cause of error] Received data invalid %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0015] [Cause of error] Interface index invalid %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency 10/2023 [789] [23A-0018] [Cause of error] HFL Master: an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0019] [Cause of error] Inverter (HFL): an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-001A] [Cause of error] SPI: an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-001B] [Cause of error] SPI: an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [790] 10/2023 [23A-001C] [Cause of error] SPI: an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-001D] [Cause of error] HSCI (DMA): interface at full capacity or not ready for operation %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-001E] [Cause of error] HSCI (DMA): an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-001F] [Cause of error] HFL (DMA): an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [791] [23A-0020] [Cause of error] HFL: interface at full capacity or not ready for operation %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0021] [Cause of error] - Error during program run - XADC not initialized %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0022] [Cause of error] - Error during program run - XADC already initialized %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0023] [Cause of error] - Program or hardware configuration faulty - Entry not found in HDT %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [792] 10/2023 [23A-0025] [Cause of error] - Device is busy or not ready for operation - Encoder FPGA: configuration failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0026] [Cause of error] Encoder-FPGA Flash ID: program or hardware configuration faulty %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0027] [Cause of error] Encoder FPGA DRAM: program or hardware configuration faulty %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0028] [Cause of error] Encoder FPGA Flash: hardware is not responding %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [793] [23A-0029] [Cause of error] Encoder FPGA Master (HFL): an error occurred at the interface %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-002A] [Cause of error] FSuC bootloader: invalid firmware loaded %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-002B] [Cause of error] FSuC firmware: firmware update failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-002C] [Cause of error] FSuC VMT: firmware update failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [794] 10/2023 [23A-002D] [Cause of error] FSuC HIK: invalid firmware loaded %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-002E] [Cause of error] - Error during program run - FSuC firmware not started %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-002F] [Cause of error] FSuC: invalid received data %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0030] [Cause of error] FSuC: device is not responding %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [795] [23A-0031] [Cause of error] FSuC: device at full capacity or not ready for operation %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0032] [Cause of error] FSuC: invalid firmware loaded %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0033] [Cause of error] FSuC: invalid parameter transfer %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0034] [Cause of error] - HSCI: an error occurred at the interface - Local error register is set %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [796] 10/2023 [23A-0035] [Cause of error] - HSCI: an error occurred at the interface - External error register is set %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0036] [Cause of error] HSCI: device is not responding %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0037] [Cause of error] HSCI: self-test of interface failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0039] [Cause of error] Flash module: Hardware initialization failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [797] [23A-003A] [Cause of error] Flash module: access to hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-003B] [Cause of error] Flash module: access to hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-003C] [Cause of error] Flash module: access to hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-003D] [Cause of error] Flash module: access to hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [798] 10/2023 [23A-003E] [Cause of error] Flash module: invalid parameter transfer %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-003F] [Cause of error] Flash module: invalid received data %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0040] [Cause of error] Flash module: configuration of the hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0041] [Cause of error] Internal access error on device: %2 %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [799] [23A-0042] [Cause of error] Zynq initialization: error during program run %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0043] [Cause of error] Start of the application software: error during program run %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0044] [Cause of error] eFuse status: access to hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0045] [Cause of error] eFuse key: access to hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [800] 10/2023 [23A-0046] [Cause of error] eFuse configuration data: error during program run %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0047] [Cause of error] eFuse write-operation: access to hardware failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0048] [Cause of error] RAM: invalid parameter transfer %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0049] [Cause of error] RAM: hardware test failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [801] [23A-004A] [Cause of error] FRAM: hardware initialization failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-004F] [Cause of error] FRAM: hardware is not responding %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0050] [Cause of error] Diagnostics Flash: hardware initialization failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0052] [Cause of error] Diagnostics Flash: hardware test failed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [802] 10/2023 [23A-0053] [Cause of error] - Error during program run - Invalid image size %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0054] [Cause of error] - Image data are incomplete or inconsistent - Application software not found %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0055] [Cause of error] - Image data are incomplete or inconsistent - Boot image not found %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0056] [Cause of error] - Image data are incomplete or inconsistent - Fall-back boot image not found %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency 10/2023 [803] [23A-0057] [Cause of error] - Image data are incomplete or inconsistent - Primary boot image not found %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0058] [Cause of error] Fall-back boot image: incorrect image offset %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0059] [Cause of error] Primary boot image: incorrect image offset %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-005A] [Cause of error] Image offset incorrect %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-005B] [Cause of error] Image data are incomplete or inconsistent - Generate the service file and inform your service agency No authentication data are available %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [804] 10/2023 [23A-005C] [Cause of error] Byte converter: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-005D] [Cause of error] -Received data invalid - Terminal: invalid character %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-005E] [Cause of error] -Received data invalid - Terminal: input too long %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0060] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [805] [23A-0061] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0062] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0063] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0064] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [806] 10/2023 [23A-0065] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0066] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0067] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0068] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [807] [23A-0069] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-006A] [Cause of error] Info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-006B] [Cause of error] - Device index invalid %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-006C] [Cause of error] -Device index invalid - Driver assignment not possible %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [808] 10/2023 [23A-006D] [Cause of error] - Device index invalid - Command was not processed %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-006E] [Cause of error] Interface designation invalid %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-006F] [Cause of error] - Error during program run - Error during main initialization phase %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0070] [Cause of error] Image authentication: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [809] [23A-0071] [Cause of error] - Program or hardware configuration faulty - Capture limit reached %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0072] [Cause of error] - Image data are incomplete or inconsistent - Faulty entry %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0073] [Cause of error] Device at full capacity or not ready for operation %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0074] [Cause of error] FPGA ID: program or hardware configuration faulty %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [810] 10/2023 [23A-0075] [Cause of error] - Command invalid - No HIK available for reading out %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0076] [Cause of error] HIK: invalid parameter transfer %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0077] [Cause of error] - Parameter transfer invalid - Maximum command size (in) exceeded %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0078] [Cause of error] - Parameter transfer invalid - Maximum command size (out) exceeded %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0079] [Cause of error] - Parameter transfer invalid - Error in the command sequence %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency 10/2023 [811] [23A-007A] [Cause of error] - Parameter transfer invalid - Address invalid %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-007D] [Cause of error] - Parameter transfer invalid - Message ID invalid %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-007E] [Cause of error] - Parameter transfer invalid - Command invalid %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-007F] [Cause of error] Encoder FPGA info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [812] 10/2023 [23A-0080] [Cause of error] Encoder FPGA info section: image data are incomplete or inconsistent %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0081] [Cause of error] - Program or hardware configuration faulty - Test environment is active %1 ID number: %3, serial number: %4 [Error correction] - Generate the service file and inform your service agency [23A-0082] [Cause of error] - Hardware initialization failed - Internal XADC voltage reference is active %1 ID number: %3, serial number: %4 [Error correction] - Restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0083] [Cause of error] HFL: self-test of interface failed (VMK) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [813] [23A-0084] [Cause of error] HFL: self-test of interface failed (VSK) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0085] [Cause of error] HFL: self-test of interface failed (VMLS) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0086] [Cause of error] HFL: self-test of interface failed (VMS) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0087] [Cause of error] HFL: self-test of interface failed (VMPS) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [814] 10/2023 [23A-0088] [Cause of error] HFL: self-test of interface failed (VSLPS) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0089] [Cause of error] HFL: an error occurred at the interface (VMTX) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-008A] [Cause of error] HFL: an error occurred at the interface (VSTX) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-008B] [Cause of error] HFL: an error occurred at the interface (VMTO) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [815] [23A-008C] [Cause of error] HFL: an error occurred at the interface (VSTO) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-008D] [Cause of error] HFL: an error occurred at the interface (VMRX) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-008E] [Cause of error] HFL: an error occurred at the interface (VSRX) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-008F] [Cause of error] HFL: an error occurred at the interface (VMSTX) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [816] 10/2023 [23A-0090] [Cause of error] HFL: an error occurred at the interface (VMI) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0091] [Cause of error] HFL: an error occurred at the interface (VSI) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0092] [Cause of error] HFL: an error occurred at the interface (VMSRX) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency [23A-0093] [Cause of error] HFL: an error occurred at the interface (VMPE) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency 10/2023 [817] [23A-0094] [Cause of error] HFL: an error occurred at the interface (VSPE) %1 ID number: %3, serial number: %4 [Error correction] - Check the interface connections and restart the control - If the problem recurs, generate a service file and inform your service agency