代码 320-0017: Configuration and PLC program incompatible

[Cause of error] A PLC program has been selected that is not compatible with the configuration of the machine. Necessary prerequisites for the successful operation of the PLC program: - PLC programs that operate with the numerical memory interface API 1.0 (TNC flag interface) can only control one operating mode group, one NC channel, and one spindle. - PLC programs that use the symbolic memory interface API 3 must create the API data structures in the number suitable for the configuration. - The correct values for the system parameters AXIS_COUNT and SPINDLE_COUNT must be defined in the configuration file of the PLC compiler. - PLC programs must define a sufficiently large memory image. All permanently assigned, non-volatile, or absolutely addressed flags must fall within the memory image. - PLC programs have to define all markers to which configuration data are to be assigned at the start of the PLC program. - Pay attention to any other, previously issued warnings. [Error correction] - Check the machine configuration - Check the configuration file of the PLC compiler for correct values - Use a suitable PLC program - Inform your service agency