コード 330-00B1: Invalid entry in safe machine parameter

[Cause of error] The configuration of the safe machine parameters is invalid. The following causes are possible: - Invalid encoder input was configured or none and all (speed or position encoder) - Invalid PWM output was configured or none at all - Invalid assignment of axes/spindles to controller main boards - Invalid assignment of PWM output and encoder input (speed or position encoder) to the controller main board - Configuration between PWM output and encoder input (speed or position encoder) is invalid [Error correction] - Check the configuration in the safe machine parameters and correct them if necessary - Switch the control off and on again - If the values of the machine parameters have been changed, they are to be loaded by entering the manufacturer's password. Then a corresponding acceptance test must be run. - Inform your service agency. [1170] 10/2023