コード 330-00BE: CC%2 error in cut-out channel STO.A.x, RDY signal missing
問題の説明と安全警告
Heidenhain TNC Series CNC は重大な CC%2 error in cut-out channel STO.A.x, RDY signal missing アラームをトリガーしました。製造サイクル中に機器への二次的損傷や部品の破損を防ぐために、資格のあるオペレーターまたはメンテナンス技術者による直ちの対応が必要です。電気キャビネットにアクセスする前に、必ず標準の安全およびLOTO手順が遵守されていることを確認してください。
公式トラブルシューティング手順
[Cause of error] The cutout channel test detected a fault: The CC-specific pulse release for the corresponding power modules of the spindle (S) over the A channel is defective. The ready signal RDY for one axis group is missing. The cutout channel STO.A.x was switched to inactive for the test of the cutout channel STO.B.x for all power modules of the axis group S. At least one of the acknowledgment signals for this cutout channel has the wrong condition, i.e. when - At least one power module reports “No readiness” (RDY.x=0), although “Readiness“ (RDY.x=1) is expected for all power modules of the axis group of the CC. [Error correction] - Check the wiring (e.g. pulse release X71 of the supply module, X73 Heidenhain interface PCB, PWM cable is defective) - Exchange defective hardware (power module) - Inform your service agency
Source: HEIDENHAIN NC Error Messages — TNC7/640/620/320/128, CNC PILOT 640, MANUALplus 620 (10/2023)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
Heidenhain TNC Series CNC のアラームについて
Heidenhain によって構築された産業用コントローラーは、内部回路と機械的リンケージを保護するための広範な診断システムで設計されています。TNC Series CNC が 330-00BE のようなエラーコードをスローする場合、通常、指令値と実際のセンサーフィードバック間の不一致を示します。
完全アラーム一覧: 4497 Heidenhain TNC Series CNC コードs.
Have a better solution?
Help the industrial community by sharing your repair experience for code 330-00BE.
Need a searchable reference for more Heidenhain TNC Series CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026