Código 330-00F5: Axis not at test position

[Cause of error] - The axis to be checked is not located at the test position (safe machine parameter positionMatch in CfgAxisSafety) - Axis is too far from the test position (safe machine parameter positionDiffRef in CfgAxisSafety) [Error correction] - Press CE to acknowledge the error message and move the axis to the test position - Then check the axis If the message appears although the axis is at the correct test position: - For gantry combinations, an axis other than the one being checked might not be in the correct position. If necessary, uncouple the gantry combination for checking. - Check the configuration of the axis traverse direction and correct it if necessary (machine parameter signCorrActualVal, signCorrNominalVal, or entry in the DIR column of the motor table) - Inform your machine manufacturer