代码 152: ILLEGAL SYNCHRONIZED AXIS NAME
问题描述与安全警告
Mazak Mazatrol Matrix CNC 触发了严重的 ILLEGAL SYNCHRONIZED AXIS NAME 警报。需要由合格的操作员或维修技师立即处理，以防止在制造周期中对设备造成二次损坏或导致零件报废。在接触电气控制箱之前，请务必确保遵循标准安全和停机挂牌 (LOTO) 程序。
官方故障排除步骤
Type of error: B — Registered data (the program or tool data includes an error) Stopped status: I — Reset stop Clearing procedure: N — Eliminate cause -> power off -> power back on Display colour: Red Cause: 1. The setting of the slave axis name in parameter M11 is not correct. 2. The name of the master axis that is specified for synchronous control does not correspond with the setting of the axis naming parameter. Action: 1. Set the name of the slave axis with a small letter. 2. With reference to the parameter, specify the correct axis as the master one for synchronous control.
Source: Mazak Mazatrol Matrix — Parameter List, M-Codes, Alarm Manual (Section 3 Alarm)
Last reviewed: 2026-07-01 · Verified against the manufacturer’s official documentation.
关于 Mazak Mazatrol Matrix CNC 警报
由 Mazak 制造的工业控制器具有广泛的诊断系统，用于保护内部电路和机械连杆。当 Mazatrol Matrix CNC 出现类似 152 的错误代码时，通常表示指令值与实际传感器反馈之间存在不匹配。
完整报警清单: 714 Mazak Mazatrol Matrix CNC 代码s.
Have a better solution?
Help the industrial community by sharing your repair experience for code 152.
Need a searchable reference for more Mazak Mazatrol Matrix CNC manuals?
We structure equipment manuals into searchable code, title, cause, solution, safety note, and source-reference data. Send a PDF and example searched codes when you need public pages, private search, or structured exports.
Space reserved for Google AdSense / Industrial Affiliate Links
Monetization target for 2026